Granite Crate Gross Weight vs Net Weight: the Gap Is the Packaging
There is no fixed gap between the gross weight and the net weight of a granite crate. The difference is the packaging itself. Stone weight can be calculated from square metres, thickness and 2.7 t/m³. Crate weight cannot, because timber species, moisture content, crate design and bracing all vary, so gross weight has to be weighed.
Granite crate gross weight vs net weight: what exactly is the difference?
Net weight counts the stone only. Gross weight adds the packaging, so the gap sits entirely on the packaging side. That side has five parts: the wooden crate, the dunnage, the pallet, the steel bands and the moisture barrier. All five go on the scale before the gross weight is complete. Buyers ask because the customs declaration, the packing list and the bill of lading all carry both columns, and the three documents have to agree with each other. Swap the two once and the correction runs through the declaration, the manifest and the delivery papers. Draw the boundary first: net weight contains no timber and no steel, and gross weight stops at the cargo; the container's own tare enters only at VGM.
Can I calculate the net weight myself?
Yes for regular slabs: square metres × thickness in metres × 2.7, where 2.7 is the density in tonnes per cubic metre. A 30mm slab weighs 81 kg per square metre, so 100 ㎡ comes to 8.1 tonnes. Our stock 30mm polished Maple Red G562, code G4562, is quoted by the square metre from 100 ㎡; convert to tonnes at 0.081 before the figure goes to a forwarder. Cut-to-shape pieces, columns and mushroom stone do not follow this formula. Count the pieces, work out the volume of one piece, multiply by 2.7, then multiply by the piece count. For a mixed container, calculate the regular slabs and the special shapes separately and add the two totals at the end. Other thicknesses use the same coefficient; the table gives three examples, and the second column multiplies straight into your square metres. Convert millimetres to metres before multiplying: 20mm is 0.02, not 20.
| Thickness | Tonnes per ㎡ | Tonnes for 100 ㎡ |
|---|---|---|
| 20mm | 0.054 | 5.4 |
| 30mm | 0.081 | 8.1 |
| 50mm | 0.135 | 13.5 |
Why can't the crate side be calculated?
Timber weight is not a constant. Density changes with species, moisture content shifts it again, and crate design changes the amount of timber used: an upright crate for large slabs, a flat crate for thin tiles and a custom crate for special shapes are three different builds. Bracing adds a fourth variable: how many dunnage bearers, how many steel bands, whether corner protectors are fitted. A packaging tare figure can be reused for the same batch in the same crate design. Change the design or the bracing and the crate has to be weighed again. Weighing an empty crate gives a number someone can check later: put the empty crate on the scale, write the reading into the packaging tare column of the packing list, and record it against the crate number. A spoken estimate from a supplier cannot fill that column, because customs and truck loading both work from it.
How many weights belong on one set of documents?
Three, and each one covers a different segment. Cargo net weight is the stone, used for the customs description and for trade statistics. Cargo gross weight is stone plus packaging, and that is the figure on the packing list and the bill of lading. Verified gross mass, or VGM, adds the container tare and the securing material inside the box, and booking plus truck allocation work from it. The three run in order: net is below gross, and gross is below VGM. When the paperwork stops at the first two and leaves VGM to the forwarder, the three figures stop matching. VGM is declared on the shipper's side, so have the weighbridge ticket in hand before you sign. A quotation that says a container holds a certain tonnage should be checked for whether it means net or gross, and the booking needs gross weight and VGM, because one cannot stand in for the other.
| Figure | What it contains | Who uses it |
|---|---|---|
| Cargo net weight | The stone only | Customs, statistics, material planning |
| Cargo gross weight | Stone plus crate, dunnage, pallet, steel bands, moisture barrier | Packing list, bill of lading |
| Verified gross mass (VGM) | Cargo gross weight plus container tare plus securing material | Booking, truck allocation, port filing |
What happens when the two figures are far apart?
It depends on the direction. If net weight is declared high and gross weight low, a physical inspection on a weighing bridge will show figures that do not match the scale ticket, and the documents have to be corrected while the sailing is missed. Trucks are allocated by gross weight, so an understated gross can surface as an axle overload only after the crate is on the trailer, and the load has to come off and be rebuilt. If gross weight is declared high, the booking is made for a heavier cargo, and the container and the truck are arranged for that weight, which changes the cost structure. None of this is certain to happen, and all of it shares one source: a weight column filled with an estimate instead of a scale reading. A tare estimated too high makes the buyer suspect short delivery on reweighing, and a tare estimated too low looks like an overload, so both ends cost time to explain.
Which figures should I ask the supplier for before ordering?
Six, and each has a job. Net weight checks your square metres and thickness. Gross weight fills the packing list and the bill of lading, and it sets the truck allocation. Packaging tare has to be a weighed empty crate, and it shows how much of the total is packaging. Crate count times pieces per crate gives the total piece count, which has to match the packing list and the bill of lading. Outside dimensions of one crate set the layout inside the container and whether an open-top is needed. Who issues the VGM decides who signs the booking data. Ask for all six on one packing list rather than across several emails, and ask for the crate numbers with them, so the goods can be traced back to the crate later. Add a weighing date to the same sheet, so the scale ticket and the packing list come from one source. Packaging tare has to be fixed at order stage, because an empty crate can only be weighed once it is built, so put the requirement for a weighed empty crate before shipment into the contract annex.
